Conduit Hanger for 4″ EMT, Rigid/IMC with Bolt, Nut, #9
February 18, 2026
Conduit Hanger for 3″ EMT, Rigid/IMC with Bolt, Nut, #7
February 18, 2026
Conduit Hanger for 3-1/2″ EMT, Rigid/IMC with Bolt, Nut, #8
Conduit Hanger for 3-1/2″ EMT, Rigid/IMC with Bolt, Nut, #8
Part # WCCN350
UPC: 811443039430
Provides secure, reliable support for conduit and pipe runs in overhead or wall‑mounted installations
Application
- Supports conduit and pipe runs in overhead, wall‑mounted, or structural installations
- Ideal for electrical, plumbing, HVAC, and low‑voltage routing
- Suitable for commercial, industrial, and residential projects
- Designed for use with EMT, rigid conduit, and standard pipe sizes
Packaging
- Unit Packaging: 25
Safety
- Follow all installation instructions carefully to ensure safe and effective performance
- Comply with all applicable codes, regulations, and job site requirements
- Do not use the product beyond its intended purpose or specified load ratings
- Improper installation or use may result in malfunction, property damage, serious injury, or death, and will void the warranty
- Use only industry‑standard hardware that meets specified requirements
Installation
- Position the hanger at the desired support point along the conduit or pipe run
- Secure the hanger to the mounting surface using appropriate fasteners for the substrate
- Place the conduit or pipe into the hanger and verify proper alignment
- Tighten the hanger to ensure stable, reliable support without over‑compressing the line