Category Archives: Attachments

1/4-20 Wide Malleable Beam Clamp

Malleable Iron Beam Clamp with 1-3/8” Wide Mouth

1/4-20 Wide Malleable Beam Clamp

MALLEABLE BEAM CLAMP WITH 1-3/8″ WIDE MOUTH

Product Details:

Malleable Iron Beam Clamp, 1-3/8” Wide Mouth, ¼-20

Part # WMBC4T-WM

Box Qty: 25

Provides an easy to install mounting base to an I-beam, girder, or other structural member, saving time and effort on the job site

Features:

High-strength malleable iron
Zinc-plating provides corrosion resistance
Universal design allows for use with a multitude of cable management hardware
Designed with a wide jaw opening to provide a secure and sturdy grip that will not slip off the beam when tightened
Lightweight design makes it easy to handle and install
1-3/8″ wide jaw opening fits flanges up to 1-3/8″ thick
Tapped with ¼-20 threads on side & bottom
UL & CUL listed

Application:

Provides base support for ¼”-20 hanging rod, j hooks, bridle rings, conduit hangers, ceiling wire, and other cable management hardware

Installation:

Attaches to girder or I beam flange up to
Secure with the included square head screw type bolt using a socket driver

Resources:

1/4-20 Malleable Beam Clamp

Malleable Iron Beam Clamp with 3/4″ Mouth

1/4-20 Malleable Beam Clamp

MALLEABLE BEAM CLAMP WITH 3/4″ MOUTH

Product Details:

Malleable Iron Beam Clamp, 3/4″ Mouth, ¼-20

Part # WMBC4T

Box Qty: 50

Provides an easy to install mounting base to an I-beam, girder, or other structural member, saving time and effort on the job site

Features:

High-strength malleable iron
Zinc-plating provides corrosion resistance
Universal design allows for use with a multitude of cable management hardware
Designed with a wide jaw opening to provide a secure and sturdy grip that will not slip off the beam when tightened
Lightweight design makes it easy to handle and install
3/4″ jaw opening fits flanges up to 3/4″ thick
Tapped with ¼-20 threads on side & bottom
UL & CUL listed

Application:

Provides base support for ¼”-20 hanging rod, j hooks, bridle rings, conduit hangers, ceiling wire, and other cable management hardware

Installation:

Attaches to girder or I beam flange up to
Secure with the included square head screw type bolt using a socket driver

Resources:

Pressed Beam Clamp for 1/2″ Flange

PRESSED BEAM CLAMP for 1/2″ FLANGE

Product Details:

Pressed Beam Clamp for 1/2″ Flange

Part # WPBC

Box Qty: 100

Provides a mounting base for quickly and easily fastening cable management hardware to an I-beam or girder

Features:

High-strength, zinc-plated pressed steel
C type clamp fits flanges 1/8″ up to 1/2″ thick
Serrated jaws for additional gripping power to securely clamp to flange
Saves time as no specialty tools are required for installation
Universal design allows for use with a multitude of cable management hardware
¼” x 20 threaded holes tapped on the back and bottom of clamp for 3/4″ threaded rod
Supplied with a pre-installed ¼-20 x 1″ combination Philips/slotted hex head machine screw
Set screw tapped at an angle to firmly lock on to steel beam
UL & CUL listed

Application:

Provides base support for ¼”-20 hanging rod, j hooks, bridle rings, conduit hangers, ceiling wire, and other cable management hardware

Installation:

Attaches to beam flange up to ½” thick
Secure with the included bolt using a socket driver or Philips head screwdriver

Resources:

Spring Steel Beam Clamp

Spring Steel Beam Clamp for 1/8”-1/2″ Flange

Spring Steel Beam Clamp

SPRING STEEL BEAM CLAMP FOR 1/8″-1/2″ FLANGE

Product Details:

Spring Steel Beam Clamp for 1/8”-1/2″ Flange, Serrated Jaw

Part # WSSBC

Box Qty: 100

Provides a mounting base for quickly and easily fastening cable management hardware to an I-beam or girder

Features:

Spring steel with black oxide finish
3/4″ jaw opening fits flanges 1/8″ to 1/2″ thick
Serrated jaw for additional gripping power to securely clamp to flange
Universal design allows for use with a multitude of cable management hardware
¼” x 20 threaded holes tapped on the back and bottom
3/8” through hole on the top and bottom
Supplied with an installed ¼-20 x 1” combination Philips/slotted hex head machine screw
UL & CUL listed

Application:

Provides base support for 1/4″ and 3/8″ threaded rod, S-hooks, electrical boxes, conduit, bridle rings, camera mounts, and other cable management hardware

Installation:

Attaches to beam flange up to ½” thick
Secure with the included bolt using a socket driver or Philips head screwdriver

Resources:

Product Inquiry

Product Inquiry