DOWNLOAD the NEW 2024 CATALOG

Category Archives: New

Winnie Industries > New
Categories Electrical Boxes, New

T BOX 4-11/16″ Square Electrical Junction Box Red

Life Safety

T BOX 4-11/16″ Square Electrical Junction Box Red

Product Details:

T BOXTM 4-11/16″ Square Deep Junction Box Red

Part # WTBOX257RD

Box Qty: 10

Eliminate the need for bends or offsets by allowing the conduit runs to enter straight into the box

Features:

  • Galvanized steel construction
  • Welded design for strength and ease of use
  • 60 cubic inch capacity
  • Extra deep for added volume and wire bending space
  • Double gang
  • Access to side knockouts in all directions
  • 1″, 3/4″ and ½” knockouts
  • (2) 1″-3/4” knockouts
  • (12) 3/4″-1/2” knockouts
  • (2) 8-32 combination Phillips/slotted screws
  • Raised ground for easy install
  • Accepts standard 4-11/16” square devices and flat covers
  • Tested in accordance with UL 514-A and CSA C22.2 No. 18.1 standard for metallic outlet boxes
  • UL & CUL Listed

Application: 

  • Ideal for use in commercial or industrial applications where larger-sized conductors or wiring devices are needed
  • Suitable for use without a bonding jumper in circuits up to 600 volts

Installation: 

  • Direct ceiling mount to joist or strut
  • Ideal for exposed ceiling applications
  • With appropriate fittings, T BoxTM may be used with conduit, metal-clad (MC) cable, or nonmetallic-sheathed (NM) cable

US Patent Pending

Resources:

Datasheet
Drawing
Image
Categories Electrical Boxes, New

T BOX 4″ Square Electrical Junction Box Red

Life Safety

T BOX 4″ SQUARE ELECTRICAL JUNCTION BOX RED

Product Details:

T BOXTM 4″ Square Deep Junction Box Red

Part # WTBOX232RD

Box Qty: 20

Eliminate the need for bends or offsets by allowing the conduit runs to enter straight into the box

Features:

  • Galvanized steel construction
  • Welded design for strength and ease of use
  • 43 cubic inch capacity
  • Extra deep for added volume and wire bending space
  • Double gang
  • Access to side knockouts in all directions
  • (8) 1/2″ knockouts
  • (6) 1/2″ – 3/4″ knockouts
  • (2) 8-32 combination Phillips/slotted screws
  • Raised ground for easy install
  • Tested in accordance with UL 514-A and CSA C22.2 No. 18.1 standard for metallic outlet boxes
  • UL & CUL Listed

Application: 

  • For use with lighting fixtures, switches or receptacles
  • Use in applications where multiple conductor runs are split into two or more directions
  • Ideal where extra depth is needed for dimmers, cameras, speakers, strobes, signals and electronic devices
  • Suitable for use without a bonding jumper in circuits up to 600 volts

Installation: 

  • Direct ceiling mount to joist or strut
  • Ideal for exposed ceiling applications
  • With appropriate fittings, T BoxTM may be used with conduit, metal-clad (MC) cable, or nonmetallic-sheathed (NM) cable

Resources:

Datasheet
Sellsheet
Drawing
Image
US Patent
Categories J Hook ACMAG, New, UHD

UHD 6” Magnetic J Hook for Overhead Mount 150 lb

6″ MAGNETIC J HOOK for OVERHEAD MOUNT 150LB

Product Details:

UHD 6” Magnetic J Hook for Overhead Mount 150 lb

Part # WUMAG-WJH96AC

Box Qty: 25

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Includes wire cable retainer clip
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 370 Cat5e cables
  • 230 Cat6 cables
  • 150 Cat6A cables
  • 125 Cat7 cables
  • 300 Fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories Mag Bridle, New

UHD 1 1/4″ Magnetic Bridle Ring 150 Lb

1 1/4″ MAGNETIC BRIDLE RING 1.5″ STEM  150LB

Product Details:

UHD 1 1/4″ Magnetic Bridle Ring 1.5″ Stem 150lb

Part # WUMAG-WBR4T125

Box Qty: 10

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Black epoxy coating provides corrosion resistance
  • Bridle ring is crafted from heavy-duty, zinc plated steal
  • Designed with open loop for quick & easy cable installation
  • Provides support for low-voltage wire & cable
  • Sticks through oil, grease and dirty areas
  • Long-lasting performance in a variety of demanding indoor and outdoor conditions

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telecom/Voice
    • Broadband, Satellite, CCTV
    • Low Voltage/Security

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories J Hook ACMAG, New, UHD

UHD 4” Magnetic J Hook for Overhead Mount 150 lb

4″ MAGNETIC J HOOK for OVERHEAD MOUNT 150LB

Product Details:

UHD 4” Magnetic J Hook for Overhead Mount 150 lb

Part # WUMAG-WJH64AC

Box Qty: 25

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Includes wire cable retainer clip
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 370 Cat5e cables
  • 230 Cat6 cables
  • 150 Cat6A cables
  • 125 Cat7 cables
  • 300 Fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories J Hook ACMAG, New, UHD

UHD 2” Magnetic J Hook for Overhead Mount 150 lb

2″ MAGNETIC J HOOK for OVERHEAD MOUNT 150LB

Product Details:

UHD 2” Magnetic J Hook for Overhead Mount 150 lb

Part # WUMAG-WJH32AC

Box Qty: 100

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Includes wire cable retainer clip
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 80 Cat5e cables
  • 50 Cat6 cables
  • 34 Cat6A cables
  • 26 Cat7 cables
  • 80 Fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories J Hook ACMAG, New, UHD

UHD 1 5/16” Magnetic J Hook for Overhead Mount 150 lb

1 5/16″ MAGNETIC J HOOK for OVERHEAD MOUNT 150LB

Product Details:

UHD 1 5/16” Magnetic J Hook for Overhead Mount 150 lb

Part # WUMAG-WJH21AC

Box Qty: 100

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Includes wire cable retainer clip
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 50 Cat5e cables
  • 30 Cat6 cables
  • 20 Cat6A cables
  • 18 Cat7 cables
  • 50 Fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories J Hook ACMAG, New, UHD

UHD 3/4” Magnetic J Hook for Overhead Mount 150 lb

3/4″ MAGNETIC J HOOK for OVERHEAD MOUNT 150LB

Product Details:

UHD 3/4” Magnetic J Hook for Overhead Mount 150 lb

Part # WUMAG-WJH12AC

Box Qty: 100

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Bendable tab for securing wires
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 16 Cat5e cables
  • 10 Cat6 cables
  • 6 Cat6A cables
  • 5 Cat7 cables
  • 16 fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
Categories J Hook MAG, New, UHD

UHD 6” Magnetic J Hook for Wall Mount 150 lb

6″ MAGNETIC J HOOK for WALL MOUNT 150LB

Product Details:

UHD 6” Magnetic J Hook for Wall Mount 150 lb

Part # WUMAG-WJH96

Box Qty: 25

Extremely strong, fast, and cost-effective cable management solution for mounting on thin metal

Features:

  • Permanent nine-pole charged rare earth neodymium magnet
  • Exceptionally strong when compared to conventional neodymium pot magnets
  • Vertical pull force up to 150 lb on sheet metal
  • Due to the intense magnetic attraction at the surface, will not easily slide like other magnets
  • Sticks through oil, grease and dirty areas
  • Magnet’s black epoxy coating provides corrosion resistance
  • J Hook is crafted from heavy-duty pre-galvanized steel
  • Smooth rounded edges for the proper bend radius of cables
  • For all types of category cable, low-voltage wire, coax, innerduct and flexible conduit & tubing
  • Provides excellent support for CAT5e, CAT6, CAT6A, CAT7 and fiber optic cables
  • Includes wire cable retainer clip
  • Complies with NEC® and TIA/EIA requirements for structured cabling systems

Application:

  • Provides support in the distribution of wire and cable bundles
    • Telcom/Voice
    • Network/Data
    • Fiber
    • Broadband, Satellite, CCTV
    • Low Voltage/Security
    • Flexible Conduit

Installation:

  • Secures to steel beams, ceiling decks, sheet metal, metal joists, van walls & other ferromagnetic surfaces
  • Engineered for max attachment to thin metal

Cable Capacity:

  • 370 Cat5e cables
  • 230 Cat6 cables
  • 150 Cat6A cables
  • 125 Cat7 cables
  • 300 Fiber optic cables

Magnet Specifications:

  • Size: 2” x 3/8” (50.8mm x 9.5mm)
  • Threaded Hole: ¼ x 20
  • Vertical Pull Force: 150 lb
  • Coating: Epoxy
  • Material: Magnet: Neodymium (NdFeB); Fender Washer: Steel
  • Temperature Tolerance: -40°F – 176°F (-40°C – 80°C)

Safety:

  • Please handle neodymium magnets with care
  • Keep neodymium magnets away from anyone with a pacemaker
  • Magnets are not toys and should be kept away from children and pets
  • Large powerful magnets can pinch your fingers or cause other injuries, use caution

Resources:

Datasheet
Image
1 2 3
Copyright © 2024 Winnie Industries. All rights reserved.
Product Inquiry
Product Inquiry