Category Archives: Bridle Ring with Powder Actuated Pin

4″ Bridle Ring w/ Nail
Categories Bridle Ring with Powder Actuated Pin

4″ Bridle Ring w/ Powder Actuated Pin

4″ Bridle Ring w/ Nail

4″ BRIDLE RING WITH POWDER ACTUATED PIN

Product Details:

4″ Bridle Ring, 1/4-20 Thread, 90° Angle Clip, Powder Actuated Shot

Part # WBR400ACT

Box Qty: 100

Fast and cost-effective alternative cable management solution for voice, data, low voltage or video cabling pathway applications

Features:

  • Crafted from heavy-duty, zinc plated steel which allows for great durability & corrosion resistance
  • Available in 1.25”, 2” & 4” ring diameter preassembled on 90° angle clip & .300 x 1-1/4″ powder actuated pin
  • Designed with open loop for quick & easy cable installation
  • Cost effective alternative to expensive cable tray
  • Provides support for CAT5e/CAT6 category cable, low-voltage wire, coax, signal & control cable and electrical wire up to 600V
  • Suitable for use in air handling systems (plenums) in accordance with Section 300.22 (C) and (D) of the National Electric Code
  • Compatible with Ramset, Hilti, and Powers nail guns

Application:

  • Provides support in the distribution of wire & cable bundles
    • Network/Data
    • Telcom/Voice
    • Broadband, Satellite, CCTV
    • Low Voltage/Security/Fire Alarm
    • Signal/Control Cable
    • Electrical Wire

Installation:

  • Secures bridle ring to concrete, masonry, steel or composite metal decking using powder actuated or single-shot gas gun
  • Use for horizontal or vertical cable runs

Safety:

  • Powder tool licensing required
  • Never place hand over the muzzle end of a loaded gun
  • Always use eye & hearing protection when using a power actuated tool

Legacy Part # WACTBR400

2″ Bridle Ring w/ Nail
Categories Bridle Ring with Powder Actuated Pin

2″ Bridle Ring w/ Powder Actuated Pin

2″ Bridle Ring w/ Nail

2″ BRIDLE RING WITH POWDER ACTUATED PIN

Product Details:

2″ Bridle Ring, 1/4-20 Thread, 90° Angle Clip, Powder Actuated Shot

Part # WBR200ACT

Box Qty: 100

Fast and cost-effective alternative cable management solution for voice, data, low voltage or video cabling pathway applications

Features:

  • Crafted from heavy-duty, zinc plated steel which allows for great durability & corrosion resistance
  • Available in 1.25”, 2” & 4” ring diameter preassembled on 90° angle clip & .300 x 1-1/4″ powder actuated pin
  • Designed with open loop for quick & easy cable installation
  • Cost effective alternative to expensive cable tray
  • Provides support for CAT5e/CAT6 category cable, low-voltage wire, coax, signal & control cable and electrical wire up to 600V
  • Suitable for use in air handling systems (plenums) in accordance with Section 300.22 (C) and (D) of the National Electric Code
  • Compatible with Ramset, Hilti, and Powers nail guns

Application:

  • Provides support in the distribution of wire & cable bundles
    • Network/Data
    • Telcom/Voice
    • Broadband, Satellite, CCTV
    • Low Voltage/Security/Fire Alarm
    • Signal/Control Cable
    • Electrical Wire

Installation:

  • Secures bridle ring to concrete, masonry, steel or composite metal decking using powder actuated or single-shot gas gun
  • Use for horizontal or vertical cable runs

Safety:

  • Powder tool licensing required
  • Never place hand over the muzzle end of a loaded gun
  • Always use eye & hearing protection when using a power actuated tool
Legacy Part # WACTBR200
1 1/4″ Bridle Ring w/ Nail
Categories Bridle Ring with Powder Actuated Pin

1-1/4″ Bridle Ring w/ Powder Actuated Pin

1 1/4″ Bridle Ring w/ Nail

1-1/4″ BRIDLE RING WITH POWDER ACTUATED PIN

Product Details:

1-1/4″ Bridle Ring, 1/4-20 Thread, 90° Angle Clip, Powder Actuated Shot

Part # WBR125ACT

Box Qty: 100

Fast and cost-effective alternative cable management solution for voice, data, low voltage or video cabling pathway applications

Features:

  • Crafted from heavy-duty, zinc plated steel which allows for great durability & corrosion resistance
  • Available in 1.25”, 2” & 4” ring diameter preassembled on 90° angle clip & .300 x 1-1/4″ powder actuated pin
  • Designed with open loop for quick & easy cable installation
  • Cost effective alternative to expensive cable tray
  • Provides support for CAT5e/CAT6 category cable, low-voltage wire, coax, signal & control cable and electrical wire up to 600V
  • Suitable for use in air handling systems (plenums) in accordance with Section 300.22 (C) and (D) of the National Electric Code
  • Compatible with Ramset, Hilti, and Powers nail guns

Application:

  • Provides support in the distribution of wire & cable bundles
    • Network/Data
    • Telcom/Voice
    • Broadband, Satellite, CCTV
    • Low Voltage/Security/Fire Alarm
    • Signal/Control Cable
    • Electrical Wire

Installation:

  • Secures bridle ring to concrete, masonry, steel or composite metal decking using powder actuated or single-shot gas gun
  • Use for horizontal or vertical cable runs

Safety:

  • Powder tool licensing required
  • Never place hand over the muzzle end of a loaded gun
  • Always use eye & hearing protection when using a power actuated tool
Legacy Part # WACTBR125
Product Inquiry
Product Inquiry